Mercasol 847 AL, which is approved according to SS 18 65 12, is a solvent borne (aliphatic naphta), wear resistant underbody corrosion protection agent, based on bitumen, wax and resin and has very good corrosion protection properties over a long period of time.
MERCASOL 847 AL
Mercasol 847AL is a high solids material meant for professional corrosion protection treatment of the underbody of vehicles where a lighter bronze coloured surface is desired. Compared to Mercasol 845/845 AL the product can be applied in thicker layers, dries faster and gives a dryer film with lower exposure to solvents. When priming on open surfaces before application of Mercasol 847AL, the Mercasol 831ML is recommended.
The film properties of Mercasol 847AL prevents it from picking up dirt due to its relatively dry surface, being chipped off by e.g. gravels and also the ability to apply extra thick coats gives the opportunity to prolong the protection time considerably. The product has been compatibility tested with the most common corrosion production systems on the market and is approved to be used on a major part of the different vehicle brands.
Environmental impact
VOC = 325,5 g/l
Article numbers
42200701 / 60-L
42200761 / 208-L
42200800 / 1000-L
Attachments
Treatment
Surfaces to be treated shall be dry and free of dirt, salt and oil. Application will be done indoors at temperatures between +15 and +25°C. Mercasol 847 AL is primarily meant to be applied by airless 1:26 to 1:32 with a feeding pressure of 6 to 7 bar.
The 300 mm under body tool with 0,5 mm nozzle is recommended for best result. Recommended film thickness is normally 600μm wet layer, which gives 350μm dry film.
Mercasol 847 AL, which is approved according to SS 18 65 12, is a solvent borne (aliphatic naphta), wear resistant underbody corrosion protection agent, based on bitumen, wax and resin and has very good corrosion protection properties over a long period of time.