NOXUDOL 1100
Noxudol 1100 is a waterborne abrasion protection for car wheel arches and underbodies with excellent anti-corrosion properties. The material has very good adhesive properties and is hardwearing.
Noxudol 1100 is a wear protection paste intended for car bodies, tin roofs and walls, iron constructions etc. Noxudol 1100 has a very good adhesion and rust proofing qualities. The dry film protects against damages caused by flying stones, ice and other mechanical wear.
Environmental Impact
VOC = 0 g/l
Article number
39511511 / 1-L
39510548 / 20-L
39510731 / 208-L
Documents
Treatment
Noxudol 1100 may only be applied on carefully cleaned surfaces. Untreated surfaces of steel in moist environment must be primed before treatment. To apply Noxudol 1100 use an airmix gun for 1 litre canister, high-pressure pump (airless) 1:26> or a brush. To achieve an effective wear protection, apply a smooth layer of 0,2 - 0,5 mm dry film, the thickness depending on the basis. The film thickness will also influence the drying time, normally 3-5 hours at room temperature. The product sets in two steps. First the water evaporates, and then a chemical hardening takes place during the next 5-10 days, depending on the temperature. After the first step, the evaporation, the film is dry, manageable and has already a protecting effect of approximately 80%. This effect increases during the chemical hardening. After the chemical hardening, Noxudol 1100 can be top coated with most paints. A practical test has to be done first on a smaller area to make sure that the material with- stands the paint. Avoid using stronger solvents or strong water based alkaline cleaning products.