Noxudol 700 is a cavity wax free from solvents with high power of penetration.

Noxudol 700 is intended for treatment of inside cavities, frames and underbody. It may, however, also be used as transport and storage protection for machines, machine parts, beams, motor parts etc.

Noxudol 750 is a chemically active anti-corrosive compound with low surface tension, based on mineral oil, waxes, rust inhibitors and solvents. After drying it forms a waxy, moisture repellent surface. Because of the low surface tension it possesses good penetrating ability as well as the displacement of any moisture that may be present. 

Noxudol 750 is intended for the treatment of the hollow spaces of motor vehicles. However, it can also be used for the protection of iron and steel plates, beams, reserve parts, wire etc.

Noxudol 720 is a thixotropic, waterborne cavity wax which after drying forms a soft grease-similar film. The product is intended for customer with special demands for penetration and non dropping 10 minutes after applying.

Noxudol 720 is intended for the treatment of the hollow spaces of motor vehicles but can also be used as a transport and storage protection.

Noxudol 750 X is a high penetrating thixotropic anti-corrosive oil for inner treatment of vehicles according to the ML-method. It is a chemically active anti-corrosive oil with low surface tension. The product is based on mineral oils and waxes with little solvents contained. The anti-corrosion oil is reinforced with most effective rust protecting inhibitors.

Noxudol 750 X is an effective anti-corrosion product for iron- and steelplate, for beams, spare parts during storage and transport, for wires etc. After drying the oil forms a waxy moisture resistant /repelling surface with added resistance against normal detergents as well as degreasing compounds.

Noxudol 702 is a rust preventive two-pack coating product free from solvent. The product is based on rust inhibitors, liquid paraffins and additives. Noxudol 702 consists of a component “A” and component “B” where component “B” only forms 3-6% of the end product. The material forms a soft, vaselin similar rust protecting film.

Noxudol 702 is a rust preventive product intended for treatment of the hollow spaces of motor vehicles according to the ML method, where you primary desire a treatment without dripping and where no high requirements on the penetration is made.

Noxudol 705-5 is a solvent free rust preventive product. Low viscosity binding compounds and ad-ditives have been used to make it possible to apply the product at room temperature. It forms after drying a soft, anti corrosive film.

Noxudol 705-5 is a penetrating protective oil and is intended for the treatment of the hollow spaces of motor vehicles according to standard cavity spraying methods. To achieve penetration, levelling and gelling, the object must be heated after treatment.

Noxudol 244 is a thin waterborne corrosion protection which after drying forms a soft, greasy film. Provides very good anticorrosive protection on untreated steel surfaces. Easily washed off even after long storing time.

Noxudol 244 should be used as a transport and storage protection for vehicle, machinery, machinery parts, beams, engine parts etc, for both outdoor and indoor storage.

Noxudol 248 is thixotropic and forms after drying a light brown, elastic and waxy surface that does not feel tacky or smeary. In addition it provides a certain mechanical protection.

Noxudol 248 is a very effective longterm rust protection, especially designed for the protection of machines, machine parts, beams etc. during storage.